AOMAG is the manufacturer and supplier of Radial Ring Magnets from 1996. Radial Ring Magnets are manufactured with the north and south pole on the outside diameter (OD) and inside diameter (ID). These can be used as motor magnets, sensor magnets, and any applications were multiple or single poles are required on the OD or ID of the magnet.
Radial Ring magnets can be manufactured as a single magnet but with limitation on size. Single radial ring magnets are limited to 60mm on the OD, 12mm on the ID, and approximately 10mm on the thickness. These single pieces can be magnetized with the same pole all around the OD, or alternating poles on the OD. Radial Rings made in a single piece usually include separate tooling charges for manufacturing and the magnetizing fixtures. sintered ndfeb radially aligned magnets
AOMAG has been assisting Corporate customers for many years with their custom radial ring magnet and magnetic assembly applications.
AOMAG works with Corporate customers to optimize their design and then manufacture the specific ring magnet or magnetic assembly to meet the required spec. AOMAG has our own ISO certified factories and controls the entire manufacturing process. For assistance from a technical representative at AOMAG.
We have following Uni Pole Radial ring magnets mould as below:
D21*d15*15mm (In stock)
D26*d20*14mm (In stock)
D28*d19*28mm
D30*d24*18mm (In stock)
D31.4*d21*3mm
D32*d25*anythickness
D32*d24*17mm (In Stock)
D32*d26*12mm (In Stock)
D35*d28*22mm(In stock)
D35*d30*17mm(In stock)
D35*d32*17mm(In stock)
D37*D27.5*5.5mm
D35*d25*20mm(In stock)
D35*d27*21.5mm(In stock)
D35*d30*17mm(In stock)
D36*d28*10mm(In stock)
D39.4*d31*3mm
D40*D20*25mm
D40*d24*22.5mm(In stock)
D42*d34*21mm(In stock)
D43.9*d36.47*30.48mm(In stock)
D48.5*d38*3.5mm
D53.6*d43.6*25mm
D52.8*d40*8mm (In Stock)
D55*d45*17.5mm (In Stock)
D58*d50*20mm (In Stock)
D60*d55*30mm (In Stock)
D60*d45*4mm
D70*d62*20mm (In stock)
D70*d58*8mm (In stock)
D70*d58*30mm (In stock)
D100*d80*50mm (In stock)
D130*d110*50mm (In stock)
How to order magnets?
Please confirm the following details before you order so that we can cooperate with you more effectively, thank you!
What's the material and performance?
What's the size and the tolerance?
What's the highest work temperature?
What's the quantity?
What's the coating? Zinc or Nickel coated?
If you need special management, Kindly contact us for more information >>.
